Combusting energy functional water

Tera Effect   A-2ME

TM

Tera Effect is

Mineral functional water that is processed into internal engine room such as engines and boilers to improve combustion efficiency by forming electric fields and terahertz waves.

The purpose of this mineral functional water is to improve the driving performance of car, create a comfortable interior space, improve the combustion efficiency such as boilers etc., and improve the heat exchange efficiency of air conditioning equipment, etc.
It is the world's first  functional material water.

The polarity of this terahertz radiator always has a potential difference and forms a circuit when electrons are acquired. By generating a high-energy electric field, electrons are emitted from the negative pole and discharged continuously in the electric field.

The generation of electricity activates oxygen in the combustion chamber, increasing the movement speed of oxygen molecules and increasing the combustion reaction.

This unique electric field effect is semi-permanent and can be expected to improve combustion efficiency, increase output, and reduce exhaust gas.

Measurement of horsepower and torque by chassis dynamo running test

Tera Effect was applied to the engine and engine room by 800 cc, the data shows the value of before and after process on horsepower and torque.

AUTOBACS (Chiba) Car model: Inspire

Tera Effect was applied to the engine and engine room by 800 cc, 250 cc was injected into the radiator. The data shows the value of before and after process on horsepower and torque.

AUTOBACS (Oita Prefecture) Model: Corolla

Reduce unburned molecules in car exhaust

On July 5, 2011, we started experiments on car exhaust.

Before the experiment, the value of opacimeter  was 0.641, but it dropped to 0.37 on the 21st.

Increasing heating performance of agricultural boilers

By measuring the temperature changes in the boiler outlet and the house, the coating process showed an average temperature increase of 5 to 7 ° C from 5 to 20 minutes after the start of combustion, compared to unprocessed processing. This rate of temperature rise corresponds to 10% of the set temperature in the house. For this reason, fuel efficiency can be reduced by adjusting the boiler temperature setting.

white logo.png
- 日本
〒105-0013 東京都港区浜松町二丁目6番4号 ガリシア浜松町1401号
2013 Santa Mineral all right reserved